Setting Liftgate Open Height; To Open With The Outside Liftgate Control Button - Ford 2014 EXPLORER Owner's Manual

Ford explorer

Hide thumbs Also See for 2014 EXPLORER:

Table of Contents

2. Press the control button located in the top of the liftgate pull-cup

Note: Allow the power system to open the liftgate after pressing the

control. Manually pushing or pulling the liftgate may activate the

system's obstacle detection feature and stop the power operation.

WARNING: Keep clear of the liftgate when activating the rear

Setting Liftgate Open Height

1. Open the liftgate.

2. Manually move the liftgate to the desired height.

3. Press and hold the control button on the liftgate until a tone sounds,

indicating the new height is set. Note: You cannot set an open height if

the liftgate position is too low.

The new open liftgate height will now be recalled when the power

liftgate is opened. To change the programmed height, repeat the above

procedure. Once you open the power liftgate you can manually move it

to a different height.

2014 Explorer (exp)

Owners Guide gf, 1st Printing, April 2013

To open with the outside liftgate

control button:

1. Unlock the liftgate with the remote

control or power door unlock control.

If the intelligent access transmitter is

within 3 feet (1 meter) of the liftgate,

the liftgate will unlock when you

press the liftgate release button.

To close with the rear cargo

area control: Press and release the