Cargo Storage; Setting The Liftgate Open Height - Ford C-Max Hybrid 2013 Quick Reference Manual

mYKeY
MyKey allows you to program certain driving restrictions in order to promote
good driving habits. You can program things like: speed restrictions, limited
volume levels and safety belt reminders. For complete information, refer to
the MyKey chapter in your Owner's Manual.
110-VolT ac PoWer PoinT
convenience
The power point is located on the rear of the center
console and can be used to power your smaller
electrical devices that do not exceed 150 watts. This
feature is available to use when your ignition is turned
inTelligenT acceSS on and the battery voltage is above 11 volts. When the
*
indicator light is on, the power point is working and
Note:
Your Intelligent Access key must be
ready to use.
within three feet of the vehicle for intelligent

cargo STorage

access to function properly.
Your vehicle is equipped with two under-floor storage compartments that are
To unlock the driver's door: Pull the front
located in front of the rear seats. You can use these compartments to store smaller
exterior door handle. Touch the raised sensor on
items discretely. With the lids secured, your items will stay in place while you drive.
the driver's door handle to lock your vehicle.
dual climaTe conTrolS
To unlock and open the trunk: Press the
exterior trunk release button near the license
With the dual climate controls, you have the
plate. The intelligent access key also contains
flexibility to operate the temperature with
a mechanical key blade, which can
one control, called mono mode, or two, where
be used to unlock the driver's
both driver and front passenger can select
door if necessary. For complete
independent temperatures using their own rotary dials.
information, refer to the Keys
To operate the dual temperature control: Use the rotary control on the passenger's
and Remote Control chapter
side. Mono mode automatically shuts off.
in your Owner's Manual.
To return back to mono mode: Press and hold the AUTO button. The passenger's
side temperature automatically adjusts to the driver's side temperature setting, and
both sides will then remain linked to the driver's control.
if equipped
12 *
®
*
Folding The rear SeaT BacK
*
To fold the rear seat back:
1. Fold the outboard head restraints and lower
the center head restraint.
2. Pull the lever up to fold the seat back forward.
3. To unfold the seat back, simply pull up on the
seat back to raise it to the upright position.
Panel rooF WiTh SunShade
*
The sun shade controls are located on the overhead console. The sun
shade has a one-touch open and close feature. To stop motion during
one-touch operation, press the control a second time.
opening and closing the Sun Shade
Fully press and release the front of the control to open the sun shade.
Fully press and release the rear of the control to close the sun shade.
For more complete information, see the Windows and Mirrors chapter
of your Owner's Manual.
1
2
handS-Free PoWer liFTgaTe
To open your liftgate hands-free while you are at the liftgate:
Move your leg toward and under, then away from the rear
bumper (similar to a kicking motion).The liftgate will power
open or close.
Note:
Your Intelligent Access key must be within 3 feet
(1 meter) of the liftgate for the "hands-free" open feature
to work, and the liftgate will not power open or close under
specific conditions. Refer to the Locks chapter in your
Owner's Manual for more information.

SeTTing The liFTgaTe oPen heighT

To change your liftgate opening height:
1. Open the liftgate.
2. Manually move the liftgate to the desired height.
3. Press and hold the control button on the liftgate until
a chime is heard, indicating the new height has been
programmed. The new open liftgate height will now be
recalled when the power liftgate is opened.
4. To change the programmed height, repeat the above
procedure. Once the power liftgate is opened, it can be
manually moved to a different height.
if equipped
*
*
13