Washer Fluid Check; Technical Specifications - Ford Mondeo Owner's Manual

Topping up
Remove the filler cap.
CAUTION
Do not top up further than the MAX
mark.
Top up with fluid that meets the Ford
specification. See Technical
Specifications (page 221).

TECHNICAL SPECIFICATIONS

Vehicle fluids
Do not use fluids which do not meet the specifications or requirements defined. Use
of unsuitable fluids may lead to damage which is not covered by your Warranty.
Item
Engine oil
Power steering fluid
Coolant
Brake fluid
Your engine has been designed to be used with Castrol and Ford Engine Oil, which gives
a fuel economy benefit whilst maintaining the durability of your engine.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C, you must use SAE 5W-30 that meets the specification defined by
ACEA A5/B5.
Using topping up oils other than the one specified can result in longer engine cranking
periods, reduced engine performance, reduced fuel economy and increased emission
levels.
Castrol engine oil recommended.
Maintenance

WASHER FLUID CHECK

Note: The front and rear washer systems
are supplied from the same reservoir.
When topping up, use a mixture of washer
fluid and water to help prevent freezing in
cold weather and improve the cleaning
capability. We recommend that you use
only high quality washer fluid.
For information on fluid dilution, refer to
the product instructions.
CAUTION
Specification
WSS-M2C913-C
WSS-M2C204-A2
WSS-M97B44-D
WSS-M6C57-A2
221
Recommended fluid
Castrol or Ford Engine Oil
Ford Power Steering Fluid
Ford or Motorcraft Anti-
freeze Super Plus Premium
Ford Super DOT 4 Brake
Fluid