Ford Mondeo Owner's Manual page 112

Setting the temperature
E91391
You can set the temperature between
15.5ºC (60°F) and 29.5ºC (85°F) in steps
of 0.5ºC (1°F). In position LO, 15ºC (59°F),
the system will switch to permanent
cooling. In position HI, 30°C (86°F), the
system will switch to permanent heating.
Note: If either position LO or HI is selected,
the system will not regulate a stable
temperature.
Mono mode
In mono mode, the temperature settings
for both the driver's and passenger's side
are linked. If you adjust the temperature
using the rotary control on the driver's side,
the settings will be adjusted to the same
setting on the passenger's side. In mono
mode, MONO appears in the display.
To switch mono mode off
Select a temperature for the passenger's
side with the rotary control on the
passenger's side. Mono mode will switch
off and MONO disappears from the
display. The temperature for the driver's
side will remain unchanged. You can now
adjust the driver and passenger side
temperatures independently of each
another. The temperature settings for each
side are shown in the display. You can set
a temperature difference of up to 4ºC
(8°F).
Note: If you set a temperature difference
of greater than 4ºC (8°F), the temperature
on the other side will be adjusted so that
the difference remains 4ºC (8°F).
Climate Control
Note: If you set one of the sides to HI or LO,
both sides will be set to HI or LO.
To switch mono mode back on
E70306
and the passenger's side temperature will
be adjusted to the driver's side
temperature.
Blower
The blower setting is indicated in the
display.
To return to auto mode, press the AUTO
button.
Air distribution
To adjust air distribution, press the desired
button. Any combination of settings can
be selected simultaneously.
E70308
A
B
C
When you select windscreen defrosting
and demisting, A, B and C switch off
automatically and the air conditioning
switches on. Outside air will flow into the
vehicle. You cannot select recirculated air.
110
To switch mono mode back on,
press the MONO button.
MONO reappears in the display
Use the buttons to adjust the
blower speed.
A B
Footwell
Face level
Windscreen
C