Audio Unit Menus; Automatic Volume Control; Digital Signal Processing (Dsp); Audio Distortion Reduction (Clip) - Ford Mondeo Owner's Manual

AUTOMATIC VOLUME
CONTROL
When available, automatic volume control
(AVC) adjusts the volume level to
compensate for engine noise and road
speed noise.
All except Sony and Sony DAB
1. Press the MENU button repeatedly
until AVC is shown in the display.
2. Use the seek up or seek down button
to adjust the AVC setting.
3. Press the MENU button or allow the
system to time out to confirm your
selection.
Sony and Sony DAB
1. Press the MENU button briefly.
2. Using the up or down navigation button
select AVC.
3. Press the MENU button or allow the
system to time out to confirm your
selection.
DIGITAL SIGNAL PROCESSING
(DSP)
DSP occupancy
This feature takes into account the
differences in distance from the various
speakers in the vehicle to each seat. Select
the sitting position for which the audio is
to be correctly enhanced.
DSP equaliser
Select the music category that most suits
your listening preference. The audio output
will change to enhance the particular style
of music chosen.

Audio unit menus

Changing the DSP settings
1.
2. Use the up and down navigation
3. Press the button between the
AUDIO DISTORTION
REDUCTION (CLIP)
When available CLIP automatically detects
sound distortion and reduces the volume
level until the distortion has been
eliminated. This means that whilst the
display might change numerically when
you raise the volume manually with the
control, there may be no actual increase
in sound.
All except Sony and Sony DAB
1.
2. Press the MENU button repeatedly
3. Using the seek up or seek down button
4. Press the MENU button or allow the
Sony and Sony DAB
1.
2. Using the up or down navigation button
3. Press the MENU button or allow the
261
Press the DSP button once for
occupancy and twice for equaliser. For
item location: See Audio unit
overview (page 250).
buttons to select the required setting.
navigation buttons to confirm your
selection.
Press and hold the MENU button until
the display changes.
until CLIP is shown in the display.
turn the function on or off.
system to time out to confirm your
selection.
Press the MENU button briefly.
select CLIP.
system to time out to confirm your
selection.