8. Diagnostics
This chapter explains how to perform simple diagnostic functions such as checking the
software version, the supply quality, printing test labels, and using password protection.
Factory Set Password
You need a password to access diagnostic functions. Press Feed / Cut three times and
then press Enter / Pause.
Checking the Software Version
From the Diagnostics Menu, press
Press Enter / Pause. You will see
Line one lists the printer model number (M9850) and line two gives the version of software
in the printer.
Printing a Test Label
NOTE: DO NOT PRINT A TEST LABEL ON A 612 PRINTER.
1. From the Diagnostics Menu, press
2. Press Enter / Pause and
70 • 8. Diagnostics
or
until you see
DIAGNOSTICS
Version
Model M9850
V 1.0
or
until you see
DIAGNOSTICS
User Diag
until you see
USER DIAG
Users Manual - 610 / 611 / 612 Printers