Parity
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm.
Then, follow these steps:
1. Press
or
until you see
2. Press Enter / Pause. You will see the current setting, for example:
3. Press
or
to display the parity you need, then press Enter / Pause. Press Escape /
Clear three times to exit to the Main Menu.
Flow Control
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm.
Then, follow these steps:
1. Press
or
until you see
2. Press Enter / Pause. You will see the current setting, for example:
3. Press
or
to display the flow control you need, then press Enter / Pause. Press
Escape / Clear three times to exit to the Main Menu.
XON is 17; XOFF is 19. Set flow control to DTR for PC computers (unless you have
XON / XOFF software).
Users Manual - 610 / 611 / 612 Printers
SERIAL COMM
Parity
PARITY
None
SERIAL COMM
Flow Control
FLOW CONTROL
DTR
4. Communication Values • 41