Paxar 610 User Manual page 69

9. Snap the printhead into place.
Do not touch here
Make sure the printhead cable does not
touch the ribbon roll.
10. Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove
any salt or oil left from handling.
11. Let the printhead dry and reload your supplies.
12. Close the printhead assembly and the cover.
13. Turn on the printer.
14. Press Feed to position the supply under the printhead.
7. Care and Maintenance • 67
Users Manual - 610 / 611 / 612 Printers