Margin Position - Paxar 610 User Manual

To change the setting, from the Main Menu, select Setup, then Supply, then Positioning.
Then, follow these steps.
1. Press or
2. Press Enter / Pause. You will see the current setting, for example:
3. Press or to change the supply position. Pressing
less supply); increases it (feeds more supply).
4. Press Enter / Pause when the number you need appears. Press Escape / Clear twice
to exit to the Main menu.

Margin Position

This function adjusts where the format prints horizontally on the supply. The adjustments
are in dots (0.0033 inch), which is the smallest measurement the printer recognizes.
The width of the print area depends on your supply size. Maximum width is four inches.
When you move the image to the right or left on the supply, avoid moving the image too
close to either edge, because it may not print.
Users Manual - 610 / 611 / 612 Printers
• 33
until you see
Positioning
Supply Pos
Enter supply pos
[-300/300]: +0
Print too far to the left.
decreases the value (feeds
Print too far to the right.
3. Setting Supply Options