Disposal After Washing - Haier HWM60-20B User Manual

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the detergent box and set it on
the control panel seat.
The method of dismantle : Push it up
aslant and gently.
The method of install : install it upwards
and aslant and push it in .
Dismantle
The filter screen of the water inlet valve is
likely to be blocked by foreign materials
and influence the water inlet. Please clean
it with brush every two months.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some
time (about 1 hour), then close the top lid.
14
The lint filter must be used during
washing.
It must be cleaned in time after each
using
Lint filter:
1.Rotate the inner tub with hand till the
lint filter reaches the position convenient
for you to take it off. Pull it up to dismantle.
2.Push it down to install.
3.Clean the filter screen after washing.
Dismantle
Install
Dismantle and Install
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc
P e t r o
Install
l
T h in n e r
Alcohol
Clean
.