Haier HWM60-20B User Manual page 13

Steps of using the operation buttons and description of the steps
PROGRAM
SPIN
1 Push the "POWER ON/OFF " button to switch on the power.
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.
Push the "PROGRAM" button to select
After switching on the power, the machine will set standard program automatically. To select other automatic
program, push the "program" button till the relative indicator is on. Refer to the "program button" on Page
10 for the selection.
For instance: select "FAST"program for laundries with small
quantity and light soil.
In selecting the standard program, the machine
will execute fuzzy program to select water level
and wash time according to the cloth and weight
of the laundries. The full procedure is controlled
automatically.
3 Push the PROCEDURE
After switching on the power, the washing machine will set wash-rinse-spin procedure
automatically. it is the standard procedure. to select other procedures, push the procrdure
button to select one or more procedures from soak, wash, rinse and spin. Refer to the
PROCEDURE SELECTION METHOD
PROCEDURE
RESERVE
suitable automatic program.
button to select suitable procedure.
on Page 12 for the selection.
START
PAUSE
WATER
LEVEL
PROGRAM
Page 10
PROCEDURE
Page 12
POWER
ON/OFF
POWER
ON/OFF
11