Washing Sequence - Haier HWM60-15P User Manual

Washing sequence

Wash timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
OFF OFF
15 3
6
12
9
WASH TIMER WASH TIMER
Wash
1.Water inlet selector
(1) Set the water inlet selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
8
Wash selector
Water-filling entrance
(Standard current,
strong current)
STRONG
STANDARD
DRAIN
WASH SELECTOR WASH SELECTOR
Water-filling selector handle
Overfilling sign
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
BUZZER BUZZER
WASH
STRONG
STANDARD
OFF
WASH TIMER
STRONG
STANDARD
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF OFF
5
1
4
2
SPIN TIMER SPIN TIMER
3
SPIN
Figure 1
Figure 2
DRAIN
WASH SELECTOR WASH SELECTOR
Figure 3
Figure 4
DRAIN
Figure 5
WASH SELECTOR WASH SELECTOR