Table Of Contents - Electrolux EW3LDF65GSN Installation Instructions Manual

Tools you will need
(Wear safety glasses when using tools):
For leveling legs and Anti-Tip Bracket:
= Adjustable wrench or channel lock pliers (Fig. 5).
= 1/4" & 5/16" Nutdriver or flat head screwdriver (Fig. 6).
Electric drill & 1/8" dia. bit (5/32" Masonry drill bit if
installing in concrete (Fig. 7).
= Level (Fig. 22).
For gas supply connection:
= Pipe wrench (Fig. 8).
For burner flame adjustment:
Phillips head and small blade-type screwdrivers (Figs.
9& 10).
For gas conversion (LP/Propane or Natural):
Open end wrench - 1/2" (Fig. 11).
Tools
Fig. 5
Fig. 6
,.B
Fig. 8
Fig. 9
Fig. 10
Fig. 7
Fig. 11
Additional materials you may need:
= Anti-Tip Template (Fig. 12), Anti-Tip bracket, 2
mounting screws (bracket and screws are supplied with
range - Fig. 13) and masking tape (Fig. 14).
Pipe joint sealant that resists action of LP/Propane gas
(Fig. 15).
Gas line manual shut-off valve (Fig. 16).
1/2" NPT 90 ° black pipe elbow (Fig. 17).
A new flexible metal appliance conduit (1/2" N PT x
3/4" or 1/2" I.D.) must be design certified by CSA
International (Fig. 18). Because solid pipe restricts
moving the range we recommend using a new flexible
conduit (48" MAXIMUM LENGTH)for each new
installation and additional reinstallations.
Always use the (2) new flare adapters (1/2" NPT x 3/4"
or 1/2" I.D.) supplied with the new flexible appliance
conduit for connection of the range (Fig. 19).
Power cord (40/50 ampere rated Cord Kit - 48"
MAXIMUM LENGTH - Fig. 20).
= 4 or 3 wire, 40/50 ampere rated wall receptacle and
mounting plate (Fig. 21).
= Copper electrical wiring and metal conduit (for hard
wiring installation only).
Fig. 22
Fig. 15
Fig. 12
Fig. 16
Fig. 19
Fig. 17
Fig. 14
4 or 3 Wire Cord Kit
48"MAXIMUIVI LENGTH
Fig. 20
Fig. 21