Draining Your Hot Tub Water; Cleaning The Acrylic Surface; Safety Hard Cover - Hydropool Serenity Hot Tubs Owner's Manual

DRAINING YOUR HOT TUb
1 Locate nearest drain facility (shower, laundry tub, floor
drain, lawn, etc.)
2 Put the hot tub control system into STANDBY/DRAIN ASSIST
mode
3 Attach garden hose to hose bib located near the hot tub
control system
4 Run garden hose to drain location
5 Open hose bib
6 Re-fill hot tub to approx. 3/4 up the skimmer opening
7 Take the system out of STANDBY/DRAIN ASSIST mode -
water should begin to circulate within 15 seconds
HOse BIB

CLEANING THE ACRYLIC SURFACE

The acrylic surface can be cleaned and polished using
a soft cloth and acrylic cleaner, available at your Hydropool
dealer.
Caution: Never use an abrasive cleaner.
H y d r O p O O l I n d u s t r I e s
SAFETY HARD COvERS
When a hot tub is uncovered, over 90% of heat is lost
from the water surface. This evaporation also affects the
chemical balance and could create humidity problems
indoors. HYDROPOOL Safety Hard Covers are engineered
for maximum thermal efficiency and appearance. They
are hinged in the middle for easier handling, and the zip
fastener allows the (tapered 4" to 3") foam inserts to be
changed if damaged. The skirt of the safety hard cover
overlaps the lip of the hot tub for a finished fit. The handles
are placed so that even one person can easily carry a large
cover. The locks, with one part fastened to the deck or skirt,
prevent small children or animals from entering the hot tub.
Do not drag the safety hard cover across the hot tub or
decking. Fold the cover first, then lift by the handles.
Standing on the hardcover could cause the tapered foam
inserts to crack, which will lead to water absorption.
NEvER LEAN OR STAND ON YOUR HARDCOvER.
. . .
The cover should be cleaned at least twice a year with a
vinyl moisturizer and protector.
33