Oce cm3522 User Manual page 150

Function detail description
4
Select "Recipient User", and then enter the user name and password.
– If the machine has been set to permit public users, "Public User" can be selected to access the
machine.
– The password can also be preset in the printer driver as a default value so that it does not have to
set for each job.
5
Click the [OK] button, and specify the desired settings, and then print the document.
– If the entered user name is a name registered on the machine, the job is printed and counted as a
job for the specified user.
Reminder
If the user authentication settings are not specified on the Configure tab, user authentication cannot be
performed. If using the user authentication function, be sure to specify the settings on the Configure
tab. For details, refer to
If performing user authentication on a server, the server settings must be specified. Click the [User
Authentication Server Setting] button to select the server.
Click the [Verify] button to communicate with this machine and check whether authentication can be
performed with the user that was entered. This function is not available unless the connection is
enabled for communications with the machine.
Océ cm3522/cm2522
"Configure tab" on page 8-3.
11
11-19