Step-By-Step Connection Setup - Matrox M9120 User Manual

Step-by-step connection setup

This section guides you through the step-by-step connection setup of your graphics hardware.
M9120 PCIe or M9125 PCIe
Connect the first monitor
1
Connect your preferred monitor to the main
connector (
card.
If your monitor has a DVI connector,
connect it directly to the main connector of
your graphics card.
If your monitor has an HD-15 connector,
use the DVI to HD-15 adapter included with
your Matrox product to connect your
monitor to the main connector.
Connect the second monitor
2
If your second monitor uses a DVI
connector, connect it directly to the
secondary connector (
card.
If your second monitor uses an HD-15
connector, use a DVI to HD-15 adapter
included with your product to connect your
monitor to the secondary connector.
Your Matrox card is now installed. Restart your computer and install your Matrox software
"Installing your Matrox software", page
) on your Matrox graphics
A
) of your graphics
B
20).
Monitor
connector
(DVI)
Monitor
connector
(DVI)
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
Matrox M-Series – User Guide 13
DVI to HD-15
adapter
Monitor
connector
(HD-15)
(see