Checking The Height Of The Shoulder Straps - Britax First Class Si User Manual

5
Finally, pull both chest pads down from your
child's shoulders onto the chest.
Now check the height of the shoulder straps as shown below.

Checking the height of the shoulder straps

IMPORTANT –
shoulder straps (rearward facing use)'. If your baby weighs 9-18kg, refer to 'The
height & shoulder straps (forward facing use)'.
The height of the shoulder straps (rearward facing use)
NO - Too high
Undo the harness and go to Changing the Height of the Shoulder Straps on page 8
To fit your child into the First Class Si refer to 'Fitting the First Class Si (rearward
facing) on page 11
The shoulder straps MUST be threaded through the slots in the cover and shell
nearest the top of your child's shoulders. If in any doubt use the slot just below the
shoulder rather than above it.
If your baby weighs less than 13kg, refer to 'The height of the
YES - Correct
REMEMBER - The chest pads
are an important safety feature
NEVER use the First Class Si
without them.
- 6 -
NO - Too high