Care And Maintenance - Britax Roundabout User Manual

Care and Maintenance

Cover Removal
Loosen the harness by pushing the adjuster button while pulling
1
the shoulder straps forward as far as possible.
2 Unhook the shoulder straps from the yoke on the rear of child
restraint.
Remove the belly pad from the buckle.
3
4 Pull upper harness straps through the shell and cover, to the front
of the restraint.
Gently remove the upper portion of the cover. Be careful not to
5
damage the energy absorbing foam.
6 Pull the harness straps, buckle tongues, chest clip, and buckle
through the slots in the cover.
WARNING:
• Do not take apart or attempt to take apart the harness. It is
unnecessary and dangerous to do so.
• Never remove the buckle tongues from the harness. They
cannot be reattached after removal.
Remove the entire cover from the restraint.
7
Refitting the Cover
To refit the cover, reverse Cover Removal directions. Make sure that
the shoulder straps are threaded through the chest clips and that
the harness is not twisted.
32
Cleaning the Cover
• Hand wash, using cold water and mild soap.
• Line dry, to prevent cover from shrinking.
• DO NOT: Bleach, machine wash, or machine dry.
Cleaning the Shell
• Sponge clean, using warm water and mild soap.
• Towel dry.
• DO NOT: Use solvents, abrasive cleaners, or disassemble the
harness.
Cleaning the Harness
• Sponge clean, using warm water and mild soap.
• Towel dry.
• DO NOT: Bleach, machine wash, machine dry, or disassemble
the harness.
Cleaning the Harness Adjuster
IMPORTANT: Periodically check the adjuster area to be sure it is
clean and free of food, coins, dirt, and other objects. If debris is
present, it must be removed to prevent interference with the
adjuster mechanism.
• Brush away loose debris, using a soft bristled brush.
• Sponge clean, using warm water and mild soap.
• Towel dry.
• DO NOT: Use solvents, abrasive cleaners, or disassemble the
harness.
Care and Maintenance
33