Table of Contents
Advertisement
S
F
EARCHING
OR
1. Turn on the device
you want to control.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
3. Press the mode
button that matches
the equipment you
want to control The
LED blinks once.
4. Press CH +
repeatedly* until
the device to be
controlled changes
channel.
If you go past the
code accidentally,
just press LAST
repeatedly until the
channel changes
again.
5. Press and release
the ENTER button to
complete the setup.
*Note: You may have to press CH +
many times (50+). If the device does not
have a Channel Up function, use the
PLAY button (VCR only) or the POWER
button.
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com
C
ODES
26
I
C
DENTIFYING
ODES FOUND USING
S
P
THE
EARCH
ROCEDURE
1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
2. Press the mode
button that matches
the equipment you
want to identify The
LED blinks once.
3. Press and release
SETUP. The LED
blinks once.
4. To find the first digit,
press each number
button from 0 to 9
until the LED blinks.
The number you
pressed is the first
digit of the code.
5. Press each number
button from 0 to 9
again as above to
find the second
digit.
6. Press each number
button in turn to
find the third digit.
When the third
digit has been
found, the LED will
go out.
27
Advertisement
Table of Contents
