X10 kr19a home automation system: operating instruction (1 page)
Summary of Contents for X10 UR73A
R R R R R E M O T E E M O T E E M O T E E M O T E E M O T E M M M M M UR73A UR73A UR73A UR73A UR73A ODEL ODEL...
TIONS TIONS TIONS Remember to exercise good common sense when using the Home Automation features of your X10 Platinum Remote – especially when scheduling unattended devices. There can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turned on.
Use this manual to become familiar with your X10 Platinum Remote... This manual will explain how to set up your X10 Platinum Remote to use it with your existing Audio/Video equipment. Next it will show you how you can use it...
The Transceiver Module works as a controller when it is used with a remote control such as the X10 Platinum Remote. When the Transceiver Module receives a command from a remote it sends digital signals over...
ODULE ODULE The Transceiver Module (sold separately) receives radio frequency (RF) commands from the X10 Platinum Remote to operate a lamp or appliance plugged into it. The Transceiver Module also passes on commands over your house wiring to control other X10 modules (also sold separately).
CHANNEL +/- CHANNEL +/- CHANNEL +/- CHANNEL +/- CHANNEL +/- Works like your original remote. Also used to switch X10 modules on and off. VOLUME +/- VOLUME +/- VOLUME +/- VOLUME +/- VOLUME +/- Works like your original remote. Also used to brighten and dim lamps connected to X10 Modules.
Notes: 1. The TV mode key can only be used to store TV codes but you can store a code for ANY device under either the VCR, CBL, or SAT mode key. E.G., you can store a Cable code under the VCR key, or a Satellite code under the Cable key, etc.
ODULES If you have purchased and installed a Transceiver Module, you can control it and other X10 modules as follows: 1 . 1 . 1 . 1 . 1 . Press and release the X10 button. 2 . 2 . 2 . 2 . 2 . Use the number...
ONTROLLER ONTROLLER If you already own an IR Mini Controller, you will need to change the X10 Home Automation code in the remote to use it. The code for standard X10 RF Home Automation is 999. The code to control the IR Mini Controller is 998.
Y S T E M Y S T E M The modules illustrated below represent just a few of the wide range of X10 compatible modules you can choose from to expand your Home Automation system. They are available from electrical outlets, department stores and mail order catalogs.
(1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase.