Appendix A: Router/Gateway Setup for Internet Viewing
To view IP Camera across the Internet, you have to make sure Router/Gateway has configured to pass
incoming TCP/UDP connections from remote PC to the IP
p
ort forwarding or virtual server for the connections. Please see the illustration as below.
Router/Gateway Port Forwarding/Virtual Server Setup
Port Definition
Setup
1
Setup 2
Setup 3
Viewing IP Camera via Web Browser
If you want to view the video via Web Browser from Internet, you have to ensure the Router/Gateway
has configured both setup1 and setup 2. If the web port is not default port "80", but changed to 8080.
The remote user has to enter http://210.66.155.85:8080. Without Setup 2, you will not see the video
streaming in this PC.
Name
Protocol
Setup 1
TCP
Setup 2
TCP
Setup 3
TCP
It is the port of Web port. You have to configure the protocol to "TCP".
It is
the port of AV Control port. You have to configure the p
It is
the port of AV Data port. You have to configure the p
Camera. The Router/Gateway should set
Port
LAN IP
80
192.168.0.20
4321
192.168.0.20
4322
192.168.0.20
38
rotocol to "TCP".
rotocol to "TCP".