10.
Appendix A Router/Gateway Setup for Internet
Viewing
To view IP Camera across the Internet, you have to make sure Router/Gateway has
configured to pass incoming TCP/UDP connections from remote PC to the IP Camera. The
Router/Gateway should set port forwarding or virtual server for the connections. Please see
illustration as below.
the
Router/Gateway Port Forwarding/Virtual Server Setup
Port Definition
Setup 1
Setup 2
Viewing Internet Camera via Web Browser
Setup 1/Setup 2
Viewing Internet Camera via Camera Viewer Utility
Setup 2
Name
Protocol
Setup 1
TCP
Setup 2
TCP
It is the port of Web port. You have to configure the protocol to
"TCP".
It is the port of Video port. You have to configure the protocol to
"TCP".
If you want to view the video via Web Browser from Internet, you
have to ensure the Router/Gateway has configured both setup1
and setup 2. If the web port is not default port "80", but changed
to 8080. The remote user has to enter http://210.66.155.85:8080.
Without Setup 2, you will not see the video streaming in this PC.
If you want to use IP Camera Viewer Utility to view the camera
from Internet, please make sure the Router/Gateway has
Port
LAN IP
80
192.168.0.20
4321
192.168.0.20
70