Wlan (Ica-107W Only) - Planet ICA-107 User Manual

Wired / wireless cmos ip camera

Hide thumbs Also See for ICA-107:

Table of Contents

3.6.

WLAN (IC

WPS

Self PinCode

Configure via Push Button Click the button and this camera will enter PBC-style WPS connection

Configure via PinCode

Wireless Setting

Wireless connection

A-107W Only)

(Example on ICA-107W)

Here displays the WPS pin code used to connect to WPS-enabled

wireless access points. You have to input this number into the WPS

enabled access point to establish WPS connection.

state for 120 sec. Please push 'Start PBC' button on the wireless AP

you wish to connect within 120 sec to establish WPS connection (The

remaining time will be displayed on the button).

If connection can not be established after 120 sec, you'll be prompted

by a message box, and you can press 'Start PBC' button to try again.

If you have wireless access point's WPS PIN code, you can input it here

and press 'Start PIN' button to start to establish PIN-style WPS

connection.

Enable or disable the wireless function of the IP Camera. By default, the

Table of Contents

Ica-107w