3.9.
System
The "System" allows users to setup the IP Camera's parameters, like camera name, dat
And also p
rovide firmware upgrade and reset tools at this page.
Camera Information
Camera Name
Password
Confirm Password
Date / Time Setting
Set Date/Time manually and
Synchronize to PC time
NTP Server (Radio Box)
Time Zone
NTP Server
Enable Daylight Saving Time Check this item to enable daylight saving adjustment.
(Example on ICA-107W)
The default camera name is "ICA-107(W)". It is recommended to
name a meaningful name for the IP Camera.
Enter the password for the default account. The password should be 4
digits.
Enter the password again to confirm the setting.
You can set the IP Camera's Date/Time manually. Or you can just
click on the Synchronize to PC time to let the IP Camera synchronize
its time to your PC automatically.
To enable the NTP function.
Select the time zone where your camera is located.
Specify the IP Address of the NTP Server here.
33
a/time setting.