Oce VarioLink 2222c User Manual page 20

2.1 Control Panel and functions
Settings
[System Auto Reset Confir-
mation]
[Auto Reset Confirmation]
[Enlarge Display Mode
Confirmation]
[Message Display Time]
[Sound Setting]
[Default Enlarge Display
Settings]
d
Reference
To return to the basic settings screen, press the Accessibility, [Close], or Reset key.
VL3622c/VL2822c/VL2222c
Configure this setting to display the screen that allows you to select either
to continue the operation without exiting the enlarge display mode or to
exit the enlarge display mode and return to the basic settings screen when
the system auto reset operation is invoked in the enlarged display.
Press the corresponding button in the Touch Panel, or press the 3 key on
the Keypad. To display a confirmation screen, select the length of time that
the message is to be displayed.
Configure this setting to display the screen that allows you to select either
to continue the operation without resetting the current settings or to reset
the settings when the automatic reset operation is invoked in the enlarge
display mode to reset the setting to the default.
Press the corresponding button in the Touch Panel, or press the 4 key on
the Keypad. To display a selection screen, select the length of time that
the message is to be displayed.
When you press the Enlarge Display key to switch the screen to the en-
larged display mode, those settings that cannot be configured in the en-
larged display screen will be canceled. Configure this setting to display the
screen that allows you to select either canceling those settings to enter the
enlarge display mode or continuing the operation without entering the en-
larged display mode.
Press the corresponding button in the Touch Panel, or press the 5 key on
the Keypad.
For details, refer to the [User's Guide Copy Operations].
For details, refer to the [User's Guide Copy Operations].
Change the default settings of the enlarge display.
Configure the default settings in the enlarged display screen, and then
press the corresponding button in the Touch Panel, or press the 3 key on
the Keypad in page [2/2]. Select a function, and select either [Factory De-
fault] or [Current Setting].
• [Default Enlarge Display Settings] can be configured by pressing the
Accessibility key when the enlarged display screen is displayed.
• Only the function displayed on the screen immediately before the Ac-
cessibility key is pressed can be selected.
• You can also change the default settings in User Settings. For details,
refer to page 2-7.
2
2-10