Tube Channel Assembly Replacement - Quadra-Fire VOYAGEUR-MBK Owner's Manual

G. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the andirons and the right front brick cover.
2. Remove the 3 right side bricks.
3. Remove the baffle protection channel by bending back
the tabs using needle nose pliers located at the right and
left side of the protection cover. Lift the cover up slightly
and pull toward the front and out of the firebox. Figure
25.1.
4. Locate the 2 channel nuts inside of chamber and remove
using a 7/16 socket wrench. Figure 25.2.
Bend Back Tabs
Figure 25.1
Tube
Channel
Assembly
Figure 25.3
October 7, 2013
Baffle Protection
Channel
2 Tube Channel Nuts
Protection Channel
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
5. Slide the tube channel assembly all the way to left until
it is off the threads. Drop the right side down, then slide
the assembly back to right. Figure 25.3.
6. The ceramic blanket and both baffle boards can be
removed at the same time you remove the tube channel
assembly.
7. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
baffles out through the front opening.
8. Re-install in reverse order.
Figure 25.2
1
1
Ceramic Blanket
Baffle
7063-512
Use 7/16 Socket Wrench
and Remove Channel Nuts
4
2 Baffle Boards
Right Front
Brick Cover
Andirons
VOYAGEUR
25