Sharp XL-E1H Operation Manual page 8

Listening to USB mass storage device/MP player
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
To play back USB/MP player with folder
■
mode off
1�
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device
that has MP/WMA format files on the unit. When
the USB memory is connected to the main unit, the
device information will be displayed.
2�
Select desired file to be played back by pressing
the or button.
�
Press the (USB
start.
File name, Title, Artist and Album name are
●
displayed if they are recorded in the USB memory
device.
Display content can be changed by pressing the
●
DISPLAY button.
Note:
To pause playback:
Press the (USB ) button.
) button. Playback will
To play back USB/MP player with folder
■
mode on
1�
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to
select USB function. Connect the USB memory
device that has MP/WMA format files on the unit.
When the USB memory is connected to the main
unit, the track information will be displayed.
2�
Press the FOLDER button, then press FOLDER
( or ) button to select desired playback folder. To
start playback, go to step . To change the playback
folder, press the FOLDER (
another folder. .
�
Select desired file to be played back by pressing
the or button.
�
Press the (USB
File name, Title, Artist and Album name are
●
displayed if they are recorded in the USB memory
device.
Display content can be changed by pressing the
●
DISPLAY button.
To remove USB memory device
■
1�
Press the (USB ) button to stop playback.
2�
Press the button again and wait until "OK" is
displayed.
�
Disconnect the USB memory device from the USB
terminal.
Notes:
Always remove the USB memory device after "OK"
●
appears on the display. Improper removal of the USB
memory device may cause irregularities to happen.
Should this happen, turn off the unit and then turn it
●
on again.
SHARP will not be held liable for the loss of data whilst
●
the USB memory device is connected to the audio
system.
This USB memory's format supports FAT 16 or FAT 32.
●
SHARP cannot guarantee that all USB memory
●
devices will work on this audio system.
USB cable is not recommended for use in this audio
●
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
E-
or ) button to select select
) button. Playback will start.