System Connections - Sharp XL-E1H Operation Manual

System connections

Precautions
■
Please ensure that the equipment is positioned in a
●
well ventilated area and ensure that there is at least
10 cm (4") of free space along the sides, top and back
of the equipment.
10 cm (4") (4") 10 cm (4")
Use the unit on a firm, level surface free from
●
vibration.
Place the speakers at least 30 cm (12") away from
●
any CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
Keep the unit away from direct sunlight, strong magnetic
●
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures
●
higher than 60°C (140°F) or to extremely low
temperatures.
If your system does not work properly, disconnect the
●
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for
●
safety.
Hold the AC power plug by the head when removing it
●
from the wall socket, as pulling the lead can damage
internal wires.
Make sure to unplug the AC power cord before making any connections.
FM aerial
The spec label (*)
MODEL NO.
XL-E1H
NO. DE MODELO
MICRO COMPONENT SYSTEM
SISTEMA MICRO COMPONENTE
AC 220 - 240V 50/60Hz 21W
SERIAL NO.
NO. DE SERIE
MADE IN CHINA
FABRIQUÉ EN CHINA / FABRICADO EN CHINA
92Lxxxxxxxxxxx
The spec label
illustration may be
different from the
actual label used.
(*) Label is located at
the bottom of the
unit.
(4")
10 cm (4") (4")
10 cm (4")
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
The AC power plug is used as a disconnect device and
●
shall always remain readily operable.
Do not remove the outer cover, as this may result
●
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
●
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
●
should be placed on the apparatus.
Attention should be drawn to the environmental
●
aspects of battery disposal.
(4")
This unit should only be used within the range of 5°C
●
- 35°C (41°F - 95°F).
The apparatus is designed for use in moderate
●
climates.
Speaker connection
■
Connect the black wire to the
●
minus (–) terminal, and the red
wire to the plus (+) terminal.
Use speakers with an impedance
●
of 4 ohms or more, as lower
impedance
damage the unit.
Do not make a mistake when connecting the right and
●
left speakers. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch each
●
other.
Do not allow any objects to fall into or to be placed in
●
the bass reflex ducts.
Do not stand or sit on the speakers. You may be
●
injured.
Right speaker
E-2
speakers can
Left speaker
Incorrect
Red
Black