Sharp XL-E1H Operation Manual page 13

Timer and sleep operation (Remote control only) (continued)
�
Adjust the volume using the VOLUME + or VOLUME – and
then press the MEMORY button. (Do not turn the volume
up too high).
�
Press the ON/STAND-BY button to enter the power
stand-by mode. The TIMER red indicator lights up and
the unit is ready for timer playback.
10�
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The "
playback.
Checking the timer setting:
Press the CLOCK/TIMER button repeatedly to view as
follows:
Cancelling the timer setting:
Press the CLOCK/TIMER button until "ONCE" or "DAILY"
appears then press MEMORY button. The unit display
"OFF".
Note:
After selecting the volume level and press the MEMORY
button to confirm, it will change to last function.
Sleep operation
■
The radio, compact disc and USB can all be turned off
automatically.
1�
Play back the desired sound source.
2�
Press the SLEEP button.
�
Within 5 seconds, press the SLEEP button repeatedly
to select the time.
SLP 120 90
�
"SLEEP" will appear.
5�
The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
To confirm the remaining sleep time:
Whilst "SLEEP" is indicated, press the SLEEP button. The
remaining time is displayed for about 10 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Whilst "SLEEP" is indicated, press the SLEEP button
repeatedly until SLEEP indicator disappears.
" indicator will blink during timer
SLEEP button repeatedly button repeatedly
60 30 15 10
To use timer and sleep operation together
■
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1�
Set the sleep time (refer to the column on the left,
steps 1 - 5).
2�
Whilst the sleep timer is set, set the timer playback
(steps 2 - 8, pages 10 - 11).
Sleep timer
setting
5 - 120 minutes
Sleep operation will
automatically stop
5
E-12
Timer playback
setting
Desired time
Timer playback
start time
End time