Dacor DR30D Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Dacor Manuals
  4. Ranges
  5. Millenia DR30D
  6. Installation instructions manual
Dacor DR30D Installation Instructions Manual

Dacor DR30D Installation Instructions Manual

Distinctive series
Hide thumbs Also See for DR30D:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Use and Care Manual, Instruction Manual
Installation
Distinctive
Series
Range
For use with models DR30D and DR3OD-C
Instructions
THIS APPLIANCE
HAS BEEN TESTED IN ACCORDANCE
WITH THE LATEST EDITIONS OF
UL858/CSA C22.2 NO. 61/ANSI Z21.1 STANDARDS
FOR HOUSEHOLD
COOKING APPLIANCES.
Part No. 106769
Rev. A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DR30D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dacor DR30D

Summary of Contents for Dacor DR30D

  • Page 1 Installation Instructions Distinctive Series Range For use with models DR30D and DR3OD-C THIS APPLIANCE HAS BEEN TESTED IN ACCORDANCE WITH THE LATEST EDITIONS OF UL858/CSA C22.2 NO. 61/ANSI Z21.1 STANDARDS FOR HOUSEHOLD COOKING APPLIANCES. Part No. 106769 Rev. A...
  • Page 2 All specifications subject to change without notice. Dacor ® assumes no liability for changes to specifications. © 2010 Dacor, all rights reserved.

  • Page 3: Table Of Contents

    Use common sense and caution when installing, maintaining or operating this or any other appliance. Always contact the Dacor Customer Service Team about problems and conditions that you do not understand. Safety Symbols in this Manual...
  • Page 4 General Safety Precautions To reduce the risk of fire, explosion, electric shock, serious injury or death when installing or using this appliance, follow basic safety _recautions, including the following: Read the accompanying use and care manual completely before operating this appliance. •...

  • Page 5: Customer Service Information

    Model Identification If you have questions or problems with installation, contact your Dacor dealer or the Dacor Customer Service Team. For repairs to Dacor appliances under warranty call the Dacor Distinctive DR30D-C/N( Service line. Whenever you call, have the model and serial number of the appliance ready.

  • Page 6: Planning The Installation

    Electrical Requirements - Canada It is the owner's responsibility to ensure that the required 4-wire electrical outlet is installed by a licensed electrician as specified below prior to range installation, The electrical outlet installation, including minimum supply wire size and Electrical grounding, must be in accordance with all governing codes Requirements...

  • Page 7: Product Dimensions

    Product Dimensions Product tolerances: +1/16" (+1.6 mm), unless otherwise stated I\Gas Gas - Electrical Access Dimensions _' inlet Range electrical access, 4 3/4" 22 1/8" 8 3/4" 13 3/4" _r_'_ cover removed (12.1 cm) (56.2 cm) (22.2 cm) (34.9 cm) * When using an appliance cord that is not factory installed, the hole size must be increased to 1 1/8"...

  • Page 8: Cabinet Layout

    The range may be installed flush to the rear wall. A non- • Access to the remote circuit breaker panel or fuse box when the range is in place. combustible rear wall is not mandatory, but Dacor highly recommends installing a non-combustible material from the •...

  • Page 9: Installation Instructions

    • Anti-tip bracket w/screws • 1 small standard burner ring • Meat probe ° Back of range! • Dacor Stainless Steel • 2 large standard burner caps Cleaner • 2 large standard burner rings [_,_,,,'/A_tiotti • Literature kit • 1 inner SimmerSear burner Locate the anti-tip bracket included in the parts box.

  • Page 10: Electrical Connection

    Removing the Oven Door Electrical Connection To make the range easier to move, remove the door to reduce weight. Open the door to its fully opened position. Using a screwdriver, rotate the catch over the retaining arm on each hinge. IMPORTANT: •...
  • Page 11 Connecting the Wiring to the Range Refer to the product data label (see page 3) for power requirements. L1 terminal There are four possible ways to wire the range: • 4-wire conduit Neutral terminal • 3-wire conduit, where local codes permit ®...
  • Page 12 Electrical Connection (Continued) Connecting the Conduit to the House Connection to Electrical Junction power supply Junction box Wire nut 4 places WHITE NOTES: • The power supply must be properly polarized• Reverse polarity will result in continuous sparking of the electrodes, even after flame ignition•...
  • Page 13 Separate No. 10 (minimum) Connection to power supply copper grounding wire Junction box Wire nut 4 places Connection to appliance (page 9) 3-Wire Connection Conduit Junction Box Connection with External Ground No. 4 Meter copper wire Metal water pipe Clamps Bare metal Insulated Pipe Jumper...
  • Page 14 Slide the end of the appliance cord into the strain relief from Electrical Connection (Continued) the bottom of the box. Appliance Cord Connections - Where Local Connect the white (neutral) wire to the neutral terminal in the box. Code Permits Connect the L1 wire to the L1 power supply terminal in the box.

  • Page 15: Gas Supply Connection

    Gas Connection Bare wire connections Loop and spade terminal connections L1 terminal Neutral terminal _ I_2 terminal Neutral to ground jumper link . ; ... L1 wire White wire NOTE: The gas pressure regulator is pre-set at the factory for the type of gas intended for use with the appliance.

  • Page 16: Final Installation

    Final Installation Peel the protective plastic coating off of the range, including the range door. Carefully slide the range into position in the cutout. The rear anti-tip leg should engage the anti-tip bracket. Use a level to make sure that the range does not tilt front to back or side to side.

  • Page 17: Cooktop Assembly

    Cooktop Assembly Grates Remove the burner rings, burner caps and grates from their shipping packages. SimmerSear Burner Assembly Install the SimmerSear burner ring on top of the SimmerSear burner base. Line up the indentations on the bottom of the SimmerSear burner ring with the pins on the top of the burner base.

  • Page 18: Verifying Proper Operation

    Repeat the bake test or burner ignition test. Verifying Proper Operation If the appliance still does not work, contact Dacor Distinctive Service at (877) 337-3226. Do not attempt to repair the appliance yourself. Have the model and serial numbers available when you call. See page 3 for location.
  • Page 20 The Life of the Kitchen? American Made*Family Owned Dacor • 600Anton Blvd. Suite 1000 Costa Mesa, CA 92626 • Phone: (800) 793-0093 • Fax: (626) 403-3130 • www.Dacor.com...

This manual is also suitable for:

Dr30d-c

Table of Contents