Adjust Flae Exhaust Adaptor; Connecting Ductwork - Frigidaire CFMV157GSA Installation Instructions Manual

Installation Instructions
I-_ MOUNT THE MICROWAVE
OVEN (cont.)
Cabinet Front
Cabinet Bottom Shelf
Filler Block
-[Equivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
MicrowaveOvenTop
[4_ Attach the microwave oven to the top cabinet.
[]Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
[] Tighten center
screw completely.
[] Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
[]Install grease filters. See the Owner's Manual
packed with the microwave.
_-_ ADJUST THE EXHAUST
ADAPTOR
Open the top cabilret alrd adjust the exhaust adaptor
to connect to the house duct.
Backof
BlowerPlate Damper Microwave
ForFront-to-Back or
Side-to-SideAdjustment,
Slide the Exhaust A daptor
as Needed
CONNECTING DUCTWORK
HouseDuct
[]Extend the house duct down to conl-lect to
the exhaust adaptor.
[]Seal exhaust duct joints using duct tape.
14