Adjust The Exhaust Adaptor; Connecting Ductwork - Frigidaire FPBM3077R Installation Instructions Manual

A5. MOUNT THE MICROWAVE
OVEN (cont.)
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4 Attach the microwave oven to the top cabinet.
5 Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
7
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
8 Install grease filters. See the Owner's Manual
packed with the microwave.
Installation Instructions
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
Tighten center
6
screw completely.
EN-15
ADJUST THE EXHAUST
A6.
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Blower Plate
A7.

CONNECTING DUCTWORK

1 Extend the house duct down to connect to
the exhaust adaptor.
2 Seal exhaust duct joints using
for high temperature applications.
IMPORTANT: Remove the cardhoard spacers between
heat shield and door.
Back of
Damper
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
House Duct
duct tape
furnance