Serial Plate Information - Frigidaire FGEF308TNFB Installation Instructions Manual

C. Level and position the rang_e_-
Slide range
to its final position. Insert the range leveling leg in the
anti-tip bracket. Visually verify if the anti-tip bracket is
engaged. Lower the range by adjusting the 4 leveling
legs alternatively until the range is level. Check if the
range is level by placing a spirit level on the oven rack.
Take 2 readings with the spirit level placed diagonally;
take a reading in one direction and then in the other
direction. Level the range if necessary by adjusting the
leveling legs.
Range __..._.
Leveling.. )_o_I1_1
Anti=Tip
Leg N _ "J._
__ Bracket
To check if the anti-tip bracket is installed
properly, use both arms and grasp the rear edge
of range back. Carefully attempt to tilt range
forward. When properly installed, the range
should not tilt forward.
Range
Figure 3
4. Serial Plate Information
A.
B.
C.
The serial plate is
located as shown.
See the serial plate
for the following
information:
Model, lot and serial
number of range.
Kilowatt rating (power
requirements).
Voltage ratings.
Figure 4
(
Raise.
Figure 5
Figure 6