GE GFDS150ED0WW Installation Instructions Manual page 7

Installation Instructions
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
• Preassemble 4" elbow with 4" duct. Wrap duct tape
Ground joint.
• Insert duct assembly, elbow first, through the side
opening and connect the elbow to the dryer internal
duct.
-&CAUTION:
Be sure not to pull o r damage the
electrical wires inside the drger when inserting the duct.
EXHAUST CAN
BEADDEDTO
LEFT O R RIGHT S IDE
• Apply duct tape as shown on the joint between the
dryer internal duct and the elbow.
DUCT CAUTION:
Internal duct joints must be
secured with tape, otherwise
theg mag separate and cause a
safetg hazard.
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
• Insert the elbow through the rear opening and connect
it to the dryer internal duct.
• Apply duct tope on the joint between the dryer internal
duct and elbow, as shown above.
CAUTION:
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET (SIDES AND BOTTOM EXHAUST)
PLATE
{KIT WE1M454)
Connect standard metal elbows and ducts to complete
the exhaust system. Cover back opening with a plate (Kit
WEllV]454) available from your local service provider. Place
dryer in final location.
-_WARNING-NEVER
LEAVE THE
BACK OPENING WITHOUT THE PLATE
(Kit WEIM454).
REGISTER YOUR NEW APPLIANCE TO RECEIVE ANY
IMPORTANT PRODUCT NOTIFICATIONS.
Please go to www.GEAppliances.com or mail in
your product registration curd.
For questions on installation, coil: 800.626.2000 (US) or
800-561-3344 (Canada).