Tools You Will Need; Mounting Space - GE CVM2072 Installation Instructions Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2 Phillipsscrewdriver
Pencil
Tin snips(for cutting
damper,if required)
Scissors
(to cut template,if necessary)
Gloves
Safetygoggles
Saw(saber,hole or keyhole)
Ruleror tape measureand
t edge
Electricdrill with ¾_",V/" and%"
drill bits
Studfinder er Hammer(optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Ductandmaskingtape
MOUNTING SPACE
66" or More
from the Floor
to the Topof
the Microwave
\
BottomEdgeof
CabinetNeedsto
be 30" or More
from the Cooking
Surface
Backsplash
NOTES:
• The space between the cabinets inust be
30" wide and fl'ee of obstructions.
• If the space between the cabinets is greater
than 30", a Filler Panel Kit may be used to fill
in the gap between the microwave oven and
the cabinets. Your Owner's Manual contains
the kit number fin" vour model.
* This microwave oven is fl)r installation over
ranges up to 36" wide.
*
If
VOU aye
going
to vent your illicrowave oven
to the outside, see Hood Exhaust Section fl)r
exhaust duct preparation.
* When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearmlce.
7