Mount The Microwave Oven; Outside Back Exhaust; Remove Exhaust Adaptor; Attach Mounting Plate To - GE CVM2072 Installation Instructions Manual

Installation Instructions
OUTSIDE BACK EXHAUST
(Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Remove Exhaust Adaptor
B3. Attach Mounting Plate to _'all
B4. Prepare Top Cabinet
BS. A(!just Blower
B6. Mount the Microwave Oven
I-_ PREPARING THE REAR WALL
&el
FOR OUTSIDE BACK EXHAUST
go/I Ileed to tilt
}lll
l O )eniw* in the rear wall for
outside exhaust.
" Read the instructions on the REAR "_4 M,I,
TEMPI ,ATE.
" Tape it to the rear wall, lining up with the holes
previously drilled fin" holes A and B in the wall
plate.
" Cut the opening, tollowing the instructions of the
REAR X__I,I, TEMPI,ATE.
REMOVE EXHAUST ADAPTOR
This microwave oven is shii)ped assembled for top
exhaust. You will need the exhaust adaptor for
installation in the rear wall opening. To remove the
exhaust adaptor t]'om the microwave oven:
[] Remove tape securing damper.
_Ren/oxe and [] I,ifl off the
saxe screw blower plate
that Damper and attached
blower adaptor from
to microwax e,
i
1
Bac_of
_'_ Microwave
I
_ Slide exhaust adaptor to one side and remoxe it.
15