GE CVM2072 Installation Instructions Manual page 9

Installation Instructions
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
%*,
Mounting Plate Tabs
'', the Cabinet Bottom
/ ill
III
III
At least 30", up to 36"
Plate position - beneath framed recessed
cabinet bottom
Mounting Plate Tabs
Touching the Back
Frame
III
I
30" to Cooktop
Plate position - beneath recessed bottom
cabinet with front overhang
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
g Depth
\
\
L
I II
I II
30" to Cooktop
Your cabinets may have decorative trim that interieres
with the microwave installation. Remove the decorative
trim to install the microwave i)roperly and to make it
level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a fl'ont overhang only, with no
back or side fl'ame, install the mounting plate down
the same distance as the fl'ont overhang depth. This
will keep the microwave level.
_ Measm'e the inside depth oI the fl'ont overhang.
[] Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
_For this type of instnllation with fl'ont overhang only,
align the motmting tabs with this horizontnl line, not
touching the cabinet bottom as described in Step D.
9