Tools You Will Need - GE JVM3160DFCC Installation Instructions Manual

TOOLS YOU WILL NEED

#1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
Installation Instructions
Pencil
Scissors (to cut
template, if necessary)
Saw (saber, hole or keyhole)
Level
Ruler or tape measure and
straight edge
Electric drill with , ,
3 16 7 16
and drill bits
1 2 5 8
Stud finder
Hammer (optional)
4
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking
tape