Table of Contents
Advertisement
TOOLS YOU WILL NEED
#1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
1" = 2.5 cm; 1' = 0.3 m
Installation Instructions
Pencil
Scissors (to cut
template, if necessary)
Saw (saber, hole or keyhole)
Level
Ruler or tape measure and
straight edge
Electric drill with
⁄
",
⁄
",
3
7
16
16
⁄
" and
⁄
" drill bits
1
5
2
8
Stud finder
Hammer (optional)
4
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking
tape
Advertisement
Table of Contents
