Adjust The Exhaust Adaptor; Connecting Ductwork - GE JVM1490 Installation Instructions Manual

Installation instructions
_] MOUNT THE OVEN {continuedl
Cabinet Front
Cabinet Bottom Shelf
Filler Block
i quivalentto
Depth
of Cabinet
Recess
Self-AligningScrew
Oven Top
[]Attach the oven to the top cabinet°
Insert
2 self aligning
screws
,_l pt
(¼"-28 x . ¼ ) through outer
top cabinet holes. Turn t_,vo
full turns on each screw.
t
I
/
[]Tighten center
screw completely.
c5 rz
NOTE: Use self:aligning screw, ¼"-28 x 2_ , on
t ,_ l/'"
,_qVl1790 and self aligning screws, ¼"-28 x, y4 ,
on J\qV/1490, SCA1000, and SCA1001.
[] Tighten the outer la, v o screws to the top of the
oven. (While tightening screws, hold the oven in
place against the wall and the top cabinet.)
/o/
[] Install grease filters. See the Owner's Manual
packed with the oven.
ADJUST THE EXHAUST
L===========_
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
CONNECTING DUCTWORK
HouseDuct
[]Extend the house duct down to connect to
the exhaust adaptor
[] Seal exhaust duct joints using duct rope.
14