Outside Top Exhaust; Attach Mounting Plate To Wall - GE JVM1490 Installation Instructions Manual

Installation instructions
OUTSIDE TOP EXHAUST (Vertical Ductl
iNSTALLATiON OVERVIEW
A1. Attach Mounting Plate to Wall
A2. Prepare Top Cabinet
A3o Install Adapter
A4. Mount Oven
AS. Adjust Exhaust Adaptor
A6. Connect Ductwork
ATTACH THE MOUNTING
PLATE TO THE WALL
Attach the plate to tile wall using toggle bolts.
At least one wood screw must be used to attach tile
plate to a wall stud.
_ Remove tile toggle wings flom tile bolts.
_ Insert tile bolts into the mounting plate through
tile holes designated to go into drywall and
reatmch the toggle wings to ¾" onto each bolt.
To use toggle bolts:
Spacingfor Toggles
MoreThanWall
+l_.!.,,_Th icl<n e ss
Wings
Mounting
Plate
Bolt End
_ Place the mounting plate against tile wall and
insert tile toggle wings into the holes in the wall
tO IIIOtlnt
the plate.
NOTE: Before tightening toggle bolts and wood
screw, make sure the robs on the mounting plate
touch the bottom of the cabinet when pushed
flush against tile wall and that tile plate is properly
centered under tile cabinet.
CAUTION: Be careful to avoid pinching fingers
between tile back of tile mounting plate and the wall.
_ Tighten all bolts. Pull the plate away from tile wall
to help tighten tile bolts.
12