Outside Top Exhaust; Attach Mounting Plate To Wall - GE JVM1665 Installation Instructions Manual

Installation Instructions
OUTSIDE TOP EXHAUST
{Vertical Duct)
INSTALLATION OVERVIEW
A1. Attach Mounting Plate to Wall
A2. Prepare Top Cabinet
A3. Install Adapter
A4. Mount Oven
AS. Adjust Exhaust Adapter
A6. Connect Ductwork
ATTACH THE MOUNTING PLATE
TO TH E WALL
Attach the plate to the wall using toggle bolts.
At least one wood screw must be used to attach
the plate to a wall stud.
[] Remove the toggle wings from the bolts.
[_ Insert the bolts into the mounting plate
through the holes designated to go into drywall
and reattach the toggle wings to s/4"onto each bolt.
To use toggle bolts:
Spacingfor Toggles
MoreThanWall
-.-I_--_i_---Thicl<n e ss
Wings
Mounting
Plate
Bolt End
[_ Place the mounting plate against the wall
and insert the toggle wings into the holes
in the wall to mount the plate.
NOTE: Before tightening toggle bolts and wood screw,
make sure the tabs on the mounting plate touch
the bottom of the cabinet when pushed flush against
the wall and that the plate is properly centered under
the cabinet.
CAUTION: Be careful to avoid pinching fingers between
the back of the mounting plate and the wall.
[_ Tighten all bolts. Pull the plate away from the wall
to help tighten the bolts.
12