Installation; Alternate Construction - GE JDP47 Installation Instructions Manual

Installation Instructions
Alternate Construction Preparation
Optional Maintop Filler or Back-
guard Kit
If counter opening extends to the wall, it will
require Maintop Filler Kit (JXS66XX) or Back-
guard Kit (JXS36XXor JXS39SS)to close the
gap.
NOTE: If the countertop is greater than 25:'
it will show a gap between the backguard
and wall or between filler kit and the wall.
If the countertop is less than 25['a gap will
occur between the countertop front and the
control panel ends.
(Seepage10,D3).
9116" ._,
I
I
I
Must Be _ ._
Flat
Wall -_
30"
Smooth Cut
Must Be Level
l
Must Be
25" Level
9/16"_ q[_ 1
_ Must Be
Flat
Refer to the Filler or Backguard Kit
instructions for Installation details.
Island Installation
When installing in an island or other
non-standard location, countertop cutout
dimensions must be according to page S.
For the anti-tip bracket instructions, see
page 9.
In this application, do not use Backguard Kit
(JXSS6XXor JXS39SS).
Cabinets Over The Range
Less Than 30"
If a SO"clearance between cooking surface
and overhead combustible material or
metal cabinets cannot be maintained,
protect the underside of the cabinets
above the cooktop with not less than 1/4"
insulating millboard covered with sheet
metal not less than 0.0122" thick.
14