GE JDP47 Installation Instructions Manual page 7

Installation Instructions
Icl Electrical ConnectionS con .
THREE-CONDUCTOR BRANCH
CIRCUIT CONNECTION
When connecting to a 3-conductor branch cir-
cuit, if local codes permit:
Connect the bare oven ground
conductor with the crimped neutral
(white) lead to the branch circuit
neutral (white or gray in color),
using wire nuts.
Connect the oven red lead to the branch
circuit red lead, and the oven black
lead to the branch circuit black lead in
accordance with local codes, using wire
nuts. If the residence red, black or white
leads are aluminum conductors, see
"WARNING" note
(Seepage 6).
Black
Branch
Range Conduit
Snaps Into Box
/
Red
Ground and "_
Neutral Wires
IWhite}
Knockout
Neutral Bare Wire
Connection
NEW CONSTRUCTION AND
FOUR-CONDUCTOR BRANCH CIRCUIT
CONNECTION
• When installing in new construction, or
• When installing oven in a mobile home or
recreational vehicle, or
• When local codes do not permit grounding
through neutral:
Cut the neutral (white)lead from the
crimp. Re-strip the neutral (white)
lead to expose the proper length of
conductor and connect it to the white or
gray branch circuit neutral in accordance
with local code using wire nuts.
Attach the lead
appliance grounding
(green or bare copper)in accordance
with local codes. If the residence
grounding conductor is aluminum,
see WARNING note (See page 6).
Connect the oven red lead to the
branch circuit red lead and the oven
black lead to the branch circuit black
lead in accordance with local codes,
using wire nuts. If the residence red,
black or white leads are aluminum
conductors, see "WARNING" note
(See page 6).
Range Conduit
Snaps Into Box
Black
/
Branch
Circuit
Ground
/
Red
White
Knockout
7 (Continued on following page)