Kanguru Defender Manager; Running Kdm - Kanguru Defender V2 User Manual

2. Kanguru Defender Manager

Kanguru Defender Manager (KDM) is the client program preloaded on the Defender's CD-ROM
partition. The user needs to login to KDM in order to access the secure, encrypted partition. KDM comes
pre-installed on your Defender. No installation on your PC is necessary.
When you connect your Defender, a CD-ROM partition and a removable disk partition should appear
under My Computer. The removable disk is the Defender's secure partition. If the removable disk does
not appear when you connect your Defender, please contact Technical Support. If you are running
Windows 7 and do not see the removable disk, please refer to page 8 in this manual.

2.1 Running KDM

To run KDM, simply connect your Defender to your computer through a USB port. The KDM application
should start automatically.
If KDM does not start automatically:
1. Open My Computer and open the Defender's CD-ROM partition. The drive letter (e.g. D:, E:, F:)
will depend on your computer.
2. Double-click on the KDMv2.exe or KDMBasic.exe file (depending on your model) to start the
KDM application.
If it is your first time running KDM you will need to complete the setup wizard in order to set your
security password (see section 2.2 The Setup Wizard on page 9). If you have already setup your security
password, you will be prompted to login (see section 2.3 Logging into KDM on page 16)
Caution! The KDMv2.exe or KDMBasic.exe file (depending on your model) needs to remain on your
Defender's CD-ROM partition at all times. Always run the application from the Defender's CD-ROM
partition. Do not try to copy KDM or run KDM from your computer's hard drive.
7
Kanguru Defender Manager