Kanguru Defender Manager Basic; Running Kdmbasic; Windows Users - Kanguru Defender Basic+ User Manual

2. Kanguru Defender Manager Basic+

Kanguru Defender Manager Basic+ (referred to throughout this manual as KDMBasic+) is the client
software preloaded on the Defender's CD-ROM partition. The user needs to login to KDMBasic+ in
order to access the secure, encrypted partition. KDMBasic+ comes pre-installed on your Defender. No
installation on your PC is necessary.

2.1 Running KDMBasic+

The Kanguru Defender Basic+ is compatible with multiple operating systems. Running the KDMBasic+
application can be different depending on the OS your computer is running.

2.1.1 Windows Users

To run KDMBasic+, simply connect your Defender Basic+ to your computer through a USB port. When
you connect your Defender Basic+, a CD-ROM partition and a removable disk partition should appear
under My Computer. If you are running Windows 7 and do not see the removable disk, please refer to
page 8 in this manual.
The KDMBasic+ application should start automatically.
If KDMBasic+ does not start automatically:
1. Open My Computer and open the Defender Basic+'s CD-ROM partition. The drive letter (e.g. D:,
E:, F:) will depend on your computer.
2. Double-click on the KDMBasic+.exe file to run the application.
Caution! The KDMBasic+.exe file needs to remain on your Defender Basic+'s CD-ROM partition at all
times. Always run the application from the CD-ROM partition. Do not try to copy or run KDMBasic+
from your computer's local hard drive.
Kanguru Defender Manager Basic+
7