Alto CYCLONE User Manual page 31

For the right wiring please check also the following table
Strain Clamp
Strain Clamp
Strain Clamp
2=Hot(+)
3=Cold(-)
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
3-pin XLR Male Plug
(seen from soldering side)
Tip
Sleeve
Ring
Use for Headphone
1/4" Stereo (TRS) Jack Plug
Tip
Sleeve
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Tip
Sleeve
Ring
Use for Insert Points
1/4" Stereo (TRS) Jack Plug
2
1
1=Ground/Screen
3
Ring=Right Signal
Sleeve=Ground/Screen
Sleeve=Ground/Screen
Ring=Return Signal
Sleeve=Ground/Screen
2=Hot(+)
Use for Main output
(For unbalanced use, leave pin 3 unconnected)
3-pin XLR Line Socket
(seen from soldering side)
30
Tip=Left Signal
Tip=Signal
Tip=Send Signal
2
1
1=Ground/Screen
3
3=Cold(-)