Alto CYCLONE User Manual page 27

[ Cyclone Master Section ]
Master section controls are the most important in every mixer, these controls affect the overall level, the headphone
listening, control room, Talkback and so on.
LEVEL
This is the main level control for the talkback and oscillator section.
ON
This switch activates and sends the talk-back/osc signal to its selected
outputs.
TALKBACK SECTION SEL TALKBACK switch
This switch will select the Talkback source (generally it's a microphone)
to communicate with musicians and other people on stage.
TALKBACK SECTION SEL OSCILLATOR switch
This switch will select the Oscillator as source signal for this mixer
section. Generally the oscillator is used for level settings of recorders.
OUTPUT Assign to 1/2 3/4 L/R
These switches allow the sound engineer to assign the talkback / osc
signal to the audio path he wants to.
The odd/even numbered switches are used to send the signal to sub
-groups (then you can send their signal to L/R outs) while L/R switch
sends the signal directly to Main Mix
Output Assign to AUX 1/2, AUX 3/4, AUX 5/6
Those switches will allow the sound engineer to address the sources
signal to Auxiliaries. In this way you can send, e.g., the Talkback signal to
all stage monitors to communicate directly with performers while audience
will hear nothing.
POWER SUPPLY MONITOR
These three LEDs will light up when the unit is powered on.
LED level ladder
This 8-LED very accurate level indicator is another useful tool of Cyclone
which provides sound engineers perfectly control mixer behaviour.
PFL/AFL LED
This LED shows the status of the level indicator when any PFL /AFL
switch is pressed.
26
TALKBACK / OSC
SELECT
0dB
TB OSC
LEVEL
GR AUX
1 1
2 2
-
+ 10
GR AUX
3 3
4 4
AUX
L 5
R 6
ON
POWER SUPPLY MONITOR
+ - +
18 18 48
LEFT RIGHT
18 18
12 12
6 6
0 0
- 6 - 6
-12 -12
-18 -18
-24 -24
AFL / PFL