Alto CYCLONE User Manual page 26

[ Cyclone Master Section ]
The group section contains all the controls for level and soloing the group signal. The most important feature is the
To L/R switch that allows the sound engineer to use in a different way the group signal. Generally this switch is
released when the sound engineer wants to record some grouped signals, while the switch is pressed when the sound
engineer wants to use the groups signal as a part of the signal to be addressed to stereo mix. The main difference
between the above mentioned ways of working concerns the way to group signals.
To L/R switch
This switch addresses the group signal to L/R path.
Fader
This long throw fader will give the sound engineer the ability to carefully
manage the group level from -
PFL
This switch allows the sound engineer to control the group signal. PFL is
the acronym of pre-fade listen, the signal is pre-fader. This large switch
is illuminated to give you an immediate visual control of which, and how
many channels are in PFL.
up to +10dB.
25
GR1
L R
10
5
0
5
10
20
30
40
50
60
-
PFL
ON
OFF
GR 1