Alto CYCLONE User Manual page 22

[ Cyclone Master Section ]
AUX 1 OUT
This unbalanced1/4" TRS connector is for auxiliary 1 send.
AUX 2 OUT
This unbalanced1/4" TRS connector is for auxiliary 2 send.
AUX 3 OUT
This unbalanced1/4" TRS connector is for auxiliary 3 send.
AUX 4 OUT AUX 4 OUT
This unbalanced1/4" TRS connector is for auxiliary 4 send.
AUX 5 OUT
This unbalanced1/4" TRS connector is for auxiliary 5 send.
AUX 6 OUT
This unbalanced1/4" TRS connector is for auxiliary 6 send.
EXTERNAL POWER SUPPLY CONNECTOR
CYCLONE has two external power supply connectors, one is
MAIN POWER, the other is BACKUP POWER. These two
connectors are used to connect the unit to the mains with the
enclosed power cord.
ATTENTION:
1. Use only original power supply!
2. To get best performance and avoid any interference, it is
better to setup the power supply 1m far away from the main
mixer unit.
EXTERNAL POWER SUPPLY CONNECTOR
MAIN POWER
ATTENTION:
21
AUX3 OUT AUX2 OUT AUX1 OUT
AUX6 OUT AUX5 OUT AUX4 OUT
AUX SENDS AUX SENDS
BACKUP POWER
USE ONLY ORIGINAL POWER SUPPLY